Saltar al contenido principal

Fix Your Stuff

Right to Repair

Parts & Tools

Cambios al paso #2

Editado por Jeff Suovanen

Edicion aprobada por Jeff Suovanen

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Remove the Home Button bracket and peel up the tape connected to it.
[* icon_reminder] During reassembly, after installing the home button, you'll need to glue this bracket into place to secure it
[* black] Scrape off as much of the old adhesive residue from the bracket as you can, then clean it with acetone or high-concentration (90% or greater) isopropyl alcohol.
[* black] Secure the bracket with hot-melt glue, superglue, or [product|IF317-072|high-strength double-sided tape]. Make sure the bracket is aligned correctly before allowing your adhesive to cure, or the home button will not click when pressed.