Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #11

Editado por Jeff Suovanen —

Edicion aprobada por Jeff Suovanen

Antes
Después
Sin cambios

Líneas de Paso

[* black] Carefully turn the MacBook over, so that the lower case lays flat.
[* black] Raise the upper case/display assembly to about a 90-100°90° angle, or use something toand prop it up against something sturdy so you don't have to hold it.
[* black] Add a piece of tape near the track pad to secure the upper case and prevent accidental movement.
[* icon_noteicon_caution] It's possible to open the MacBook all the way and lay both sides down flat, but this may put undue strain ondamage the remaining connecting cablesflex cables and is not recommended.
[* black] Raise the upper case/display assembly to about a 90-100°90° angle, or use something toand prop it up against something sturdy so you don't have to hold it.
[* black] Add a piece of tape near the track pad to secure the upper case and prevent accidental movement.
[* icon_noteicon_caution] It's possible to open the MacBook all the way and lay both sides down flat, but this may put undue strain ondamage the remaining connecting cablesflex cables and is not recommended.

Imagen 2

Ninguna imagen anterior

Añadido