Saltar al contenido principal

Changes to Step #9

Editado por Andrew Optimus Goldheart

Edicion aprobada por Andrew Optimus Goldheart

Borrada
Añadida
Sin cambios

Step Lines

[* black] While we're on the topic of imaging, here's one last component that makes up the OnePlus 2's fancy photographer: The infrared laser rangefinder.
[* black] ComprisedThis component is made up of a focusedtwo parts: an IR LED and anmatched receiver.
[* black] Our guess about how it works: The
IR receiver, this component likely works by projectingLED is used to project a cone of IR light on the subject, and then measuring the receiver to measure the apparently width of the projected light with the receivershape. This would allow it tolets you estimate the distance to the subject, and snap the focus to the right focus distance fasterdistance.
[* icon_note] We also shot it full of X-rays, because we can
.
[* black] ComprisedThis component is made up of a focusedtwo parts: an IR LED and anmatched receiver.
[* black] Our guess about how it works: The
IR receiver, this component likely works by projectingLED is used to project a cone of IR light on the subject, and then measuring the receiver to measure the apparently width of the projected light with the receivershape. This would allow it tolets you estimate the distance to the subject, and snap the focus to the right focus distance fasterdistance.
[* icon_note] We also shot it full of X-rays, because we can
.