Saltar al contenido principal

Cambios a Paso #6

Editado por Arthur Shi

Edicion aprobada por Arthur Shi

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Slide the pick along the edge of the display, towards the headphone jack.
[* black] If there is still a considerable amount of resistance when sliding the opening pick, repeat the iOpener heating procedure and apply additional heat.
[* icon_caution] Be careful not to let the opening pick slide between the fused LCD and front panel, as doing so can permanently damage the display.
[* icon_note] A good rule of thumb is to never insert the opening pick more than a quarter inch (6 mm) into the iPad.
[* icon_note] A good rule of thumb is to never insert the opening pick more than a quarter inch (6 mm) into the iPad.