Saltar al contenido principal

Cambios a Paso #24

Editado por Dante Mazzanti

Edicion aprobada por Dante Mazzanti

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Continue lifting the display assembly from the front-facing camera side.
[* black] Pull the display slightly away from the bottom edge to completely separate the adhered components.
[* black] Keep lifting until the front panel assembly is roughly perpendicular to the body of the iPad.
[* icon_caution] Do '''not''' attempt to fully separateremove the components yet—there aredisplay yet—it is still attached to the rear case by three delicate ribbon cables trapped beneath a connector bracketcables.
[* icon_caution] Do '''not''' attempt to fully separateremove the components yet—there aredisplay yet—it is still attached to the rear case by three delicate ribbon cables trapped beneath a connector bracketcables.