Saltar al contenido principal

Cambios a Paso #24

Editado por Evan Noronha

Edicion aprobada por Evan Noronha

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Continue lifting the display assemblyassembly from the front-facing camera side.
[* black] Pull the display slightly away from the Lightning connectorbottom edge to completely free it fromseparate the adhesiveadhered components.
[* black] ContinueKeep lifting until the front panel from the camera side until itassembly is roughly perpendicular to the casebody of the iPad.
[* black] Continue lifting the display assemblyassembly from the front-facing camera side.
[* black] Pull the display slightly away from the Lightning connectorbottom edge to completely free it fromseparate the adhesiveadhered components.
[* black] ContinueKeep lifting until the front panel from the camera side until itassembly is roughly perpendicular to the casebody of the iPad.
[* icon_caution] Do '''not''' attempt to fully separate the components yet—there are three ribbon cables trapped beneath a connector bracket.