Saltar al contenido principal

Cambios a este Paso

Editado por Evan Noronha

Edicion aprobada por Evan Noronha

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Insert wisdom hereSlide the pick down along the edge of the iPad, releasing the adhesive as you go until you reach the top left hand corner of the iPad.
[* black] If there is still a considerable amount of resistance when sliding the opening pick, reheat and reapply the iOpener once again to soften the adhesive.
[* icon_caution] Be careful to not let the opening pick slide between the fused LCD and front panel, doing so could damage the screen
.
[* black] Insert wisdom hereSlide the pick down along the edge of the iPad, releasing the adhesive as you go until you reach the top left hand corner of the iPad.
[* black] If there is still a considerable amount of resistance when sliding the opening pick, reheat and reapply the iOpener once again to soften the adhesive.
[* icon_caution] Be careful to not let the opening pick slide between the fused LCD and front panel, doing so could damage the screen
.