Saltar al contenido principal

Cambios a Paso #5

Editado por Evan Noronha

Edicion aprobada por Evan Noronha

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Roll your wrist very slightly to gently pullFirmly pull up on the suction cup andto to create a small gap between the front panel and the rear case.
[* black] Roll your wrist very slightly to gently pullFirmly pull up on the suction cup andto to create a small gap between the front panel and the rear case.
[* icon_caution] Do not pull too hard or you may shatter the glass.
[* black] InsertOnce you've opened a sufficient gap, insert an opening pick into the gap to prevent the adhesive from resealing.
[* black] InsertOnce you've opened a sufficient gap, insert an opening pick into the gap to prevent the adhesive from resealing.