Saltar al contenido principal

Cambios a Paso #5

Editado por Andrew W.

Edicion aprobada por Andrew W.

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Insert wisdom hereCarefully place a suction cup towards the top edge of the iPad
[* black] Be sure the cup is completely flat on the screen to get a tight seal.
[* black] While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel glass from from the rear case.
[* black] Place an opening pick in the separation to prevent the adhesive from resealing
.
[* black] Insert wisdom hereCarefully place a suction cup towards the top edge of the iPad
[* black] Be sure the cup is completely flat on the screen to get a tight seal.
[* black] While holding the iPad down with one hand, pull up on the suction cup to slightly separate the front panel glass from from the rear case.
[* black] Place an opening pick in the separation to prevent the adhesive from resealing
.