Saltar al contenido principal

Cambios a Paso #2

Editado por Paige Reisman

Edicion aprobada por Paige Reisman

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* icon_note] The following steps involve using an iOpener to soften the adhesive holding the front panel assembly in place. When using the iOpener, be sure to heat it forin the microwave for no more than 30 seconds, and lay it over the iPad for about two minutes each time you use itseconds.
[* icon_note] The following steps involve using an iOpener to soften the adhesive holding the front panel assembly in place. When using the iOpener, be sure to heat it forin the microwave for no more than 30 seconds, and lay it over the iPad for about two minutes each time you use itseconds.
[* black] Handling it by the tabs on either end, place a heated iOpener over the top edge of the iPad.
[* black] Let the iOpener sit on the iPad for two minutes to soften the adhesive securing the front panel to the rest of the iPad.
[* black] Let the iOpener sit on the iPad for two minutes to soften the adhesive securing the front panel to the rest of the iPad.