Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #8

Editado por Eric Doster

Aprobación pendiente

Sin cambios

Líneas de Paso

[* black] Curing and Finishup:
[* black] Let the mixture cure.
[* black] It should take, depending on your weather, about 1 hour or so to dry completely.
[* black] Don't remove the transparency until dry.
[* black] Once dry, remove the transparency and use a fine sand paper to even out any new bumps from the new fiberglass surface.
[* black] Then, voila! your board should be back to working order. Get out there and this time try to be more careful on the trip back to the car :)