Saltar al contenido principal

Cambios a Paso #16

Editado por Walter Galan

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Unscrew and removeRemove the 4.2 mm Phillips screw that secures the white plastic bracket to the lens assembly.
[* red] Unscrew and removeRemove the 4.2 mm Phillips screw that secures the white plastic bracket to the lens assembly.
[* black] Lift the bracket off the lens assembly.
[* icon_reminder] TransferIf you are going to install a new lens, make sure to transfer the white plastic bracket and screw to the new laser lens before installation.
[* icon_reminder] TransferIf you are going to install a new lens, make sure to transfer the white plastic bracket and screw to the new laser lens before installation.