Saltar al contenido principal

Cambios a Paso #9

Editado por David Hodson

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* icon_note] The side of the EMI shield with the slot for the DVD lens ribbon cable has two small metal clips that fasten to black plastic tabs.
[*
black] Insert wisdom hereUse the tip of a spudger to bend the two metal clips up enough so that they no longer are fastened to their respective plastic tabs.
[* icon_note] The EMI shield is made of a soft, malleable metal. It can be easily be bent out and back into shape, but excessive fatigue may cause the clips to break.
[* icon_reminder] Make sure both clips are pushed back down into their original positions at reassembly
.
[* icon_note] The side of the EMI shield with the slot for the DVD lens ribbon cable has two small metal clips that fasten to black plastic tabs.
[*
black] Insert wisdom hereUse the tip of a spudger to bend the two metal clips up enough so that they no longer are fastened to their respective plastic tabs.
[* icon_note] The EMI shield is made of a soft, malleable metal. It can be easily be bent out and back into shape, but excessive fatigue may cause the clips to break.
[* icon_reminder] Make sure both clips are pushed back down into their original positions at reassembly
.

Imagen 2

Versión Antigua

Nueva Versión