Saltar al contenido principal

Cambios a Paso #8

Editado por David Hodson

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Insert wisdom hereicon_note] Lay the DVD drive board on the work surface next to the rest of the drive so that it and its cables are out of the way.
[* red] Remove the single 5.0 mm Phillips screw from the DVD lens EMI shield
.
[* black] Insert wisdom hereicon_note] Lay the DVD drive board on the work surface next to the rest of the drive so that it and its cables are out of the way.
[* red] Remove the single 5.0 mm Phillips screw from the DVD lens EMI shield
.