Saltar al contenido principal

Cambios al paso #1

Editado por Jeff Suovanen

Edicion aprobada por Jeff Suovanen

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Pull up the ribbon cable.
+[* black] Carefully peel away the audio board ribbon cable from the adhesive securing it to the lower case.
+ [* icon_caution] Take care not to damage the cable. If the adhesive offers a lot of resistance, first soften the adhesive by heating the lower case directly beneath it with an iOpener, and try again.
[* black] SSP_249, SSP_250, SSP_251