Paso Dell Latitude E6500 Teardown Historial #18

Cambios al paso #18

Editado por Luis Gomez — 21 de dic. de 2010

-	[* black] Removing motherboard from bottom assembly.
-	[* black] I show a picture of the palm rest for warning of cables. Etc.
+	[* black] Removing motherboard from bottom assembly. I show a picture of the top palm assembly for precaution again.
	[* black] Disconnect the two ribbon cables found on opposite corners of the motherboard.
	[* black] The cable on the bottom left should have two pressure pins, if not just pull the cable out.
	[* black] The cable on the top right will have two pressure pins for locking, release them and pull the cable out using the hard film.
-	[* black] Remove 6 screws using the #0 Philips Screwdriver.
+	[* black] Remove 8 screws from the motherboard using the #0 Philips Screwdriver.
	[* black] 4 black screws are found along the edges of the motherboard.
-	[* black] 2 Metalic screws are found underneath the ribbon cable on the bottom left. Remove them.
+	[* black] 2 Metalic screws are found underneath the ribbon cable on the bottom left. Remove them. The last 2 screws are on the hard drive cage on the bottom right.
+	[* black] Enjoy the sight. You are done! There are a few other parts but those should be easy to remove from here.