Saltar al contenido principal

Cambios al paso #23

Editado por Rose Hulsman

Edicion aprobada por Rose Hulsman

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Tilt the printer forward and remove a Philips screw with lockwasher from the bottom area of the printer.
-[* icon_note] The lockwasher is attached to the screw, so you do not need to worry about losing it.
+[* red] Tilt the printer forward and remove the Phillips screw with a lock-washer from the bottom area of the printer.
+[* icon_note] The lock-washer is attached to the screw, so you do not need to worry about losing it.