Saltar al contenido principal

Cambios al paso #15

Editado por Rose Hulsman

Edicion aprobada por Rose Hulsman

Antes
Después
Sin cambios

Líneas de Paso

-[* icon_caution] Be gentle when handling these wires and connectors. They may break or bend, rendering your printer inoperable.
+[* icon_caution] Carefully and gently handle the wires and cables in the printer. They may break or bend, rendering your printer inoperable.
[* red] Remove the ribbon cable by pulling directly along the cable.
[* orange] Remove the white connector by pressing down on the tab and pulling out.
[* yellow] Pull the purple wire connectors directly out. You do not need to mark which cable goes where, as they are all unique sizes.
-[* green] Remove the white connector as described in the orange bullet.
+[* green] Remove the white connector by pressing down on the tab and pulling out.