Saltar al contenido principal

Cambios al paso #9

Editado por Rose Hulsman

Edicion aprobada por Rose Hulsman

Antes
Después
Sin cambios

Líneas de Paso

[* black] Rotate the device so it rests on its back.
-[* red] Remove the two Philips M3 screws from the right side covers.
+[* red] Unscrew and remove the two Philips M3 screws as indicated from the right side covers.
[* icon_note] Most of the screws in this printer are identical - the ones that are different will be noted as such.