Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #2

Editado por Walter Galan —

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* icon_caution] It will be necessary to slide the small clear plastic cable retainer (boxed in red) glued to the logic board out of the way before disconnecting the camera cable. Be careful not to break any components off the board as you slide it away from the camera cable connector.
[* black] Pull the camera cable connector toward the optical drive to disconnect it from the logic board.
[* blackicon_note] This socket is metal and easily bent. Be sure to align the connector with its socket on the logic board before mating the two pieces.
[* blackicon_note] This socket is metal and easily bent. Be sure to align the connector with its socket on the logic board before mating the two pieces.