Saltar al contenido principal

Cambios al paso #12

Editado por Andrew Bookholt

Aprobación pendiente

Sin cambios

Líneas de Paso

[* icon_note] Removing the battery before lifting out the logic board is not strictly required, but makes removing the logic board easier and safer. If you leave your battery in, be especially careful not to bend the logic board against the battery's case near its bar code.
[* black] Remove the following Tri-Wing screws securing the battery to the upper case:
[* red] One 5.5 mm Tri-Wing screw
[* orange] One 13.5 mm Tri-Wing screw
[* black] Lift the battery out of the upper case.