Saltar al contenido principal

Cambios al paso #4

Editado por Geoff Wacker

Edicion aprobada por Geoff Wacker

Antes
Después
Sin cambios

Líneas de Paso

[* black] With the tweezers, carefully lift up on the tape covering the electrical strip shown in the picture.
-[* icon_caution] Using excessive force on the tape (which controls the brightness) could cause a tear.
-[* red] Remove the electrical strip from the motherboard by pulling the white tab to unlock it.
+[* icon_caution] Be careful with the tape, as it can tear easily.
+[* red] Use a spudger to disconnect the ZIF connector.