Saltar al contenido principal

Cambios al paso #4

Editado por Jonathan Chianglin

Edicion aprobada por Jonathan Chianglin

Sin cambios

Líneas de Paso

[* black] With the tweezers, carefully lift up on the tape covering the electrical strip shown in the picture.
-[* icon_caution] Do this extremely carefully, because the tape is connected to the actual electrical connection that controls the brightness in your phone. Using excessive force could cause a tear.
+[* icon_caution] Using excessive force on the tape (which controls the brightness) could cause a tear.
[* red] Remove the electrical strip from the motherboard by pulling the white tab to unlock it.