Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #6

Editado por Bradley Plummer

Edicion aprobada por Bradley Plummer

Antes
Después
Sin cambios

Líneas de Paso

[* black] Turn device overtitle] End Casing
[* red] Using a Phillips 00 screwdriver, unscrew the two 3.9mm screws
to face the back.
[* black] To
the right of the cross-like menu, unscrew 3.9mm the two screwscursor pad on the phone-likeU-shaped frame.
[* black] Then turnTurn the device over andso the front of the camera is facing you.
[* orange] Using a Phillips 00 screwdriver,
unscrew the two 3.9mm screwsscrews on the end casing.
[* black] Then use the plastic opening tool toUsing a spudger, pry off the end casing.
[* black] Turn device overtitle] End Casing
[* red] Using a Phillips 00 screwdriver, unscrew the two 3.9mm screws
to face the back.
[* black] To
the right of the cross-like menu, unscrew 3.9mm the two screwscursor pad on the phone-likeU-shaped frame.
[* black] Then turnTurn the device over andso the front of the camera is facing you.
[* orange] Using a Phillips 00 screwdriver,
unscrew the two 3.9mm screwsscrews on the end casing.
[* black] Then use the plastic opening tool toUsing a spudger, pry off the end casing.

Imagen 2

Versión Antigua

Nueva Versión