Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #5

Editado por Bradley Plummer

Edicion aprobada por Bradley Plummer

Antes
Después
Sin cambios

Líneas de Paso

[* black] Unscrewtitle] Black "Olympus" Face Plate
[* red] Using a Phillips 00 screwdriver, unscrew
the 3.9mm screw onlocated next to the rear of the deviceblack "Olympus" face plate.
[* black] Useorange] Using a Hex 00 screwdriver toT6 Torx screwdriver, unscrew the two 3.5mm Hex screws.
[* orange] Use
screws located on the Spudger toblack "Olympus" face plate.
[* yellow] Using a spudger,
gently pry upoff the black "Olympus" face plate.
[* black] Unscrewtitle] Black "Olympus" Face Plate
[* red] Using a Phillips 00 screwdriver, unscrew
the 3.9mm screw onlocated next to the rear of the deviceblack "Olympus" face plate.
[* black] Useorange] Using a Hex 00 screwdriver toT6 Torx screwdriver, unscrew the two 3.5mm Hex screws.
[* orange] Use
screws located on the Spudger toblack "Olympus" face plate.
[* yellow] Using a spudger,
gently pry upoff the black "Olympus" face plate.

Imagen 2

Versión Antigua

Nueva Versión