Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #2

Editado por Casey Goodings

Edicion aprobada por Andrew W.

Antes
Después
Sin cambios

Líneas de Paso

[* black] Turn the camera so that you are lookingfacing at the bottom of the camera.
[* black] Unscrew the far leftthree 3.9mm screw using the Phillips Head screwdriver (size 00). Unscrew the 3.9mm screw on the right side. Unscrew the 3.9mm screw in the middle#00 screws.
[* black] Turn the camera so that you are lookingfacing at the bottom of the camera.
[* black] Unscrew the far leftthree 3.9mm screw using the Phillips Head screwdriver (size 00). Unscrew the 3.9mm screw on the right side. Unscrew the 3.9mm screw in the middle#00 screws.
[* black] Use the spudger to remove the plating on the bottom of the camera.