Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #9

Editado por Zacharias Merriam

Edicion aprobada por Zacharias Merriam

Antes
Después
Sin cambios

Líneas de Paso

[* red] Unhook the small printed circuit board by gently pressing the board towards the top of the device and lifting up.
[* icon_note] Note a ribbon cable should be attached at the top. This does not need to be disconnected yet.
[* icon_note] Note a ribbon cable should be attached at the top. This does not need to be disconnected yet.