Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #9

Editado por Andrew Logan

Edicion aprobada por Andrew Logan

Antes
Después
Sin cambios

Líneas de Paso

[* black] Unhook the small printed circuit board by gently pressing forward and lifting up
[* icon_note] Note a ribbon cable should be attached
[* icon_remindericon_note] If the printed circuit doesn't come out easily, there are retaining claws at the bottom and left side near the LCD circled in red.
[* icon_remindericon_note] If the printed circuit doesn't come out easily, there are retaining claws at the bottom and left side near the LCD circled in red.