Saltar al contenido principal

Cambios al paso #9

Editado por Michael Clark

Edicion aprobada por Michael Clark

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Unhook the small printed circuit board by gently pressing forward and lifting up
+[* red] Unhook the small printed circuit board by gently pressing the board towards the top of the device and lifting up.
[* icon_note] Note a ribbon cable should be attached
- [* icon_note] If the printed circuit doesn't come out easily, there are retaining claws at the bottom and left side near the LCD circled in red.

Imagen 1

Versión Antigua

Nueva Versión