Saltar al contenido principal

Cambios al paso #2

Editado por Zacharias Merriam

Edicion aprobada por Zacharias Merriam

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Remove the two 3.5 mm Phillips head screws using a 26 bit driver.
- [* icon_note] There are two screws next to the tripod attachment. Be sure to remove the top most screw furthest to you.
+[* red] Remove the two black M1.4 X 3.5 Phillips head screws.
+ [* icon_note] There are two screws next to the tripod attachment. Be sure to remove the top most screw furthest to you. The third screw isn't necessary to remove at this time.