Saltar al contenido principal

Cambios al paso #3

Editado por Megan Rund

Edicion aprobada por Megan Rund

Antes
Después
Sin cambios

Líneas de Paso

+[* black] Carefully remove the viewfinder from the encasing around it. There is a wire ribbon that will still be attaching it to the camera.
+[* black] Using the curved tip tweezers unhook the clasps on the sides of the viewfinder that are holding the back panel on.
+[* black] Using the curved tip tweezers unhook the clasp on the bottom of the viewfinder that is holding the back panel on.

Imagen 1

Ninguna imagen anterior

Añadido

Imagen 2

Ninguna imagen anterior

Añadido