Cambios al paso #1
Editado por Kyle Rooney —
Edicion aprobada por Kyle Rooney
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] Remove the four 8.1mm T4 Torx screws securing the midframe and set them aside. These can be easily removed using the 54 Bit Driver Kit. | |
| [* black] Use the spudger tool to do a bit more prying and the the midframe and motherboard assembly will pop right out. | |
| + | [* icon_caution] Watch out for the ribbon cable connecting the midframe and motherboard to the GoPro housing. Use the spudger tool to disconnect the cable and fully free the internal components from the GoPro housing. |