Cambios al paso #1
Editado por Chad Carlson —
Edicion aprobada por Chad Carlson
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* black] Once the internal components are removed, take out your handy dandy spudger and pry off the pieces of tape that hold down the image sensor. |
|---|---|
| - | [* black] Remove the four ______mm T4 Torx screws and set them aside. These can be easily removed using the 54 Bit Driver Kit. |
| - | [* black] Using the spudger again, pry off the connector ribbon from the motherboard. (don't worry it comes off pretty easily) |
| + | [* black] Remove the four 8.1mm T4 Torx screws securing the midframe and set them aside. These can be easily removed using the 54 Bit Driver Kit. |
| + | [* black] Use the spudger tool to do a bit more prying and the the midframe and motherboard assembly will pop right out. |