Cambios al paso #1
Editado por Kyle Rooney —
Edicion aprobada por Kyle Rooney
- Antes
- Después
- Sin cambios
Líneas de Paso
| + | [* black] Once the internal components are removed, take out your handy dandy spudger and pry off the pieces of tape that hold down the image sensor. |
|---|---|
| + | [* black] Remove the four ______mm T4 Torx screws and set them aside. These can be easily removed using the 54 Bit Driver Kit. |
| + | [* black] Using the spudger again, pry off the connector ribbon from the motherboard. (don't worry it comes off pretty easily) |