Repara tus cosas Comunidad Tienda

Cambios al paso #3

Editado por Khulan Orgil —

Edicion aprobada por Khulan Orgil

Antes
Después
Sin cambios

Líneas de Paso

[* red] Using two fingers, pull out the fan power connector.
-[* black] Take the fan out first, lift the bottom and take it out at an angle.
-[* red] Remove the heatsink, try rotating the copper plate toward the screen then sliding the whole heat sink to the right. It should lift out after.
+[* black] Take the fan out, lift the bottom and take it out at an angle.
+[* red] v
[* icon_caution] Do not force the heat sink out because it is very easy to damage.