Saltar al contenido principal

Cambios al paso #6

Editado por Megan Rund

Edicion aprobada por Megan Rund

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Locate the orange wire ribbon attaching the back encasement to the motherboard in the lower right-hand corner of the camera (lens facing away).
+[* red] Find the orange wire ribbon attaching the back encasement to the I/O board in the lower right-hand corner of the camera (lens facing away).
[* black] Carefully lift up the brown clip holding the wire ribbon in place and pull the ribbon out of the clasp with your fingers or tweezers.
[* icon_caution] Be cautious when the removing the wire ribbon; it is very delicate.