Saltar al contenido principal

Cambios al paso #2

Editado por Kelly Fitzgerald

Edicion aprobada por Kelly Fitzgerald

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Locate and remove the two Philips #000 screws, length 3 mm, on the left side of camera.
-[* orange] Remove the Philips #000 screw, length 4 mm, located between the two 3 mm screws.
-[* yellow] Locate and remove the two Philips #000 screws, length 4 mm, on the bottom left corner.
+[* red] Locate and remove the two Phillips #000 screws, length 3 mm, on the left side of camera.
+[* orange] Remove the Phillips #000 screw, length 4 mm, located between the two 3 mm screws.
+[* yellow] Locate and remove the two Phillips #000 screws, length 4 mm, on the bottom left corner.