Saltar al contenido principal

Cambios al paso #2

Editado por Kelly Fitzgerald

Edicion aprobada por Kelly Fitzgerald

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Locate and remove the three Philips #000 screws of length 1/8" on the left side of camera.
-[* yellow] Locate and remove the two Philips #000 screws of length 1/8" on the bottom left corner.
+[* red] Locate and remove the three Philips #000 screws on the left side of camera. The middle, left most screw in the photo is 4/10 mm and the two screws on the sides are 3/10 mm.
+[* yellow] Locate and remove the two Philips #000 screws of length 4/10 mm on the bottom left corner.