Cambios al paso #5
Editado por Robert Hou —
Edicion aprobada por Robert Hou
- Antes
- Después
- Sin cambios
Líneas de Paso
[* black] For the next connector, which is right next to the previous wire, there is a piece of tape that is sealing it to the board. Remove this first. |
[* black] For the next connector, which is right next to the previous wire, there is a piece of tape that is sealing it to the board. Remove this first. |
[* black] Next, grab onto the connector and slowly pull it from the socket in the logic board. |