Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #3

Editado por Calvin Laverty

Edicion aprobada por Calvin Laverty

Antes
Después
Sin cambios

Líneas de Paso

[* black] Wait! Before you pull out the LCD, lift up slowly and see the three connecting wires from the casing to the back of the LCD!
[* black]
Slowly pull out the two cables in their connecting sockets.
[* black]
Then unscrew the remaining cable from the logic board using the TR 10 Screwdriver. Now your LCD is free from its casing!
[* black] Wait! Before you pull out the LCD, lift up slowly and see the three connecting wires from the casing to the back of the LCD!
[* black]
Slowly pull out the two cables in their connecting sockets.
[* black]
Then unscrew the remaining cable from the logic board using the TR 10 Screwdriver. Now your LCD is free from its casing!