Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #3

Editado por Calvin Laverty

Edicion aprobada por Calvin Laverty

Antes
Después
Sin cambios

Líneas de Paso

[* black] Wait! Before you pull out the LCD, lift up slowly and see the three connecting wires from the casing to the back of the LCD! Slowly pull out the two cables in their connecting sockets. Then unscrew the remaining cable from the logic board using the TR 10 Screwdriver. Now your LCD is free from its casing!