Saltar al contenido principal

Cambios al paso #3

Editado por Calvin Laverty

Edicion aprobada por Calvin Laverty

Sin cambios

Líneas de Paso

-[* black] Wait! Before you pull out the LCD, lift up slowly and see the three connecting wires from the casing to the back of the LCD!
-[* black] Slowly pull out the two cables in their connecting sockets.
-[* black] Then unscrew the remaining cable from the logic board using the TR 10 Screwdriver. Now your LCD is free from its casing!
+[* black] Slowly lift the LCD out from its placement and tilt it upwards.
+[* icon_caution] There are three wires that connect the LCD to the rest of the components. Make sure not to pull hard and break any of the wires!

Imagen 3