Saltar al contenido principal

Cambios al paso #1

Editado por Calvin Laverty

Edicion aprobada por Calvin Laverty

Antes
Después
Sin cambios

Líneas de Paso

[* black] Lay down the display with screen side up.
-[* black] Attach the two suction cups to opposite-diagonal corners.
+[* icon_note] Since the display is able to be tilted up and down, we found it useful to prop up the screen up with a styrofoam block in between the screen and the base.
+[* black] Place the two suction cups on both sides of the top of the screen and make sure to lock them in place.
[* black] The glass screen to connected to the rest of the display by small magnets. Lift slowly and the screen will come right off!