Saltar al contenido principal

Cambios al paso #10

Editado por Brittany McCrigler

Edicion aprobada por Brittany McCrigler

Sin cambios

Líneas de Paso

[* black] the s1!
[* black] and some closeups, if we have anything to say about those?
+[* black] Most of the S1 is wire bonding onto the board from flexible circuit—which is why they encapsulated it in resin—no solder, minimal stability.
+ [* black] Wire bonds are typically 10-17 microns, very small, very fragile.
+ [* black] This saves space, as soldered packages will be thicker, but requires a whole new type of manufacturing.