Saltar al contenido principal

Cambios al paso #3

Editado por Jeff Suovanen

Edicion aprobada por Jeff Suovanen

Antes
Después
Sin cambios

Líneas de Paso

-[* black] We start by removing the clamp screw that holds the two halves of the lightsaber together.
-[* black] Something about the clamp bars.
-[* black] Obi-Wan saw fit to include a charging port on his lightsaber. Lucky for us, he decided to use a standard DC barrel jack connector.
+[* black] When we're all through ogling the crystal, we set out to open the saber itself. We'll start by unscrewing this clamp pin that secures the switch housing cover.
+[* black] With the pin removed, we're able to lift the clamp brackets out with no trouble.
+[* icon_note] It seems Obi-Wan saw fit to include a charging port on his lightsaber. Lucky for us, he decided to use a standard DC barrel jack connector.
+ [* black] Unscrewing this small retaining ring loosens the port from the housing cover.