Paso Canon Powershot SX30 IS Back Camera Housing Replacement Historial #3

Cambios al paso #3

Editado por Roar Iverson — 1 de oct. de 2018

Edicion aprobada por Roar Iverson

-	[* black] Turn the camera so that ~~you face~~ the bottom ~~side of the camera~~
-	[* red] Unscrew the three ~~4 mm~~ screws shown red using a screwdriver
-	[* orange] Unscrew the ~~lone 6 mm~~ screw ~~shown orange~~
-	[* yellow] Do not touch the screw shown yellow, ~~it can remain in~~
+	[* black] Turn the camera so that the bottom is visible, as shown.
+	[* red] Unscrew the three 4mm screws shown red using a screwdriver.
+	[* orange] Unscrew the single 6mm screw.
+	[* yellow] Do not touch the screw shown yellow, removal is unnecessary.