Cambios al paso #4
Editado por Jesse Mandell —
Edicion aprobada por Jesse Mandell
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* black] Place the wires back on the |
|---|---|
| + | [* black] Place the wires back on the circut board |
| [* black] The large one can be replaced by placing the wire gently in the slot and then pushing the lock into place | |
| - | [* black] The smaller wire should be fed back into the board using tweezers |
| + | [* black] The smaller wire should be fed back into the board using tweezers to prevent bending at the edge. |
| [* black] To finish, follow the previous steps in reverse order to put everything back where it belongs |