Repara tus cosas Comunidad Tienda

Cambios al paso #8

Editado por Geoff Wacker —

Edicion aprobada por Geoff Wacker

Antes
Después
Sin cambios

Líneas de Paso

-[* blue] Remove the visible base plate screws.
+[* blue] Remove the visible midframe screws.
[* red] There is a screw beneath the foam square that must be removed as well.
-[* black] The screw holding the silver wrist-strap loop on the side of the camera must also be removed
-[* black] Pull up the base plate
-[* icon_caution] Be careful moving the plate away from the ribbons don't force it, gently slide the plate away from the ribbons
+[* black] The screw holding the silver wrist-strap loop on the side of the camera must also be removed.
+[* black] Gently lift the midframe up and out of the device.
+[* icon_caution] Be careful moving the midframe away from the ribbons don't force it, gently slide the plate away from the ribbons.