Repara tus cosas Comunidad Tienda

Cambios al paso #1

Editado por Shannon Farwell —

Edicion aprobada por Shannon Farwell

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Locate and remove the 2 screws (3.2mm) found on the bottom side of the camera.
-[* orange] Locate and remove the 2 screws (3.2mm) found on the side of the camera.
-[* yellow] Locate and remove the 2 screws (3.2mm) found on the side of the camera where the terminals are.
-[* green] Open the flap revealing the cable inputs and remove the final screw (3.8mm) found inside.
+[* red] Remove the 2 screws (3.2mm phillips head #00) found on the bottom side of the camera.
+[* orange] Remove the 2 screws (3.2mm phillips head #00) found on the side of the camera.
+[* yellow] Remove the 2 screws (3.2mm phillips head #00) found on the side of the camera where the terminals are.
+[* green] Open the flap revealing the cable inputs and remove the final screw (3.8mm phillips head #00) found inside.