Cambios al paso #1
Líneas de Paso
| + | [* red] Locate and remove the 2 screws (3.2mm) found on the bottom side of the camera (see photo). |
|---|---|
| + | [* red] Locate and remove the 2 screws (3.2mm) found on the side of the camera (see photo). |
| + | [* red] Locate and remove the 2 screws (3.2mm) found on the side of the camera where the cable inputs are found (see photo). |
| + | [* blue] Open the flap revealing the cable inputs (as shown in the photo) and remove the final screw (3.8mm) found inside. |
| + | [* icon_note] After removing the final screw, the camera body cover will be loose. |
Imagen 1
Ninguna imagen anterior
Añadido
Imagen 2
Ninguna imagen anterior
Añadido
Imagen 3
Ninguna imagen anterior
Añadido